Exploring the Smart Start Feature for the Qolsys IQ Panel 2 Plus
Posted By Michael GorisOne feature on the Qolsys IQ Panel 2 Plus that we have never discussed before is the Smart Start feature. This feature is used for conveniently enrolling compatible smart home automation devices by scanning a QR code. It is a nice alternative to the traditional inclusion process.
The Smart Start feature was quietly included back in Qolsys IQ Panel 2 System Firmware Version 2.4.0. As it is a relatively minor feature, it was largely overlooked, and we never covered it in great detail. If your Qolsys IQ Panel 2 Plus had System Firmware Version 2.4.0 or higher installed when it was brand-new, then it already has the Smart Start feature. If the system was running a lower firmware version when brand-new, then you need to upgrade the Z-Wave firmware for the system to unlock the feature. Upgrading the system firmware will not automatically update the Z-Wave firmware and provide access to the Smart Start feature. We wrote a comprehensive FAQ on upgrading the Z-Wave firmware on a Qolsys IQ Panel 2 Plus, which you can view here.
The required Z-Wave firmware version for using the Smart Start feature on the Qolsys IQ Panel 2 is Z-Wave Firmware Version 6.81.03. In addition to providing access to the Smart Start feature, upgrading to this Z-Wave firmware version will also upgrade the Z-Wave security protocol for the system to S2. This protocol more advanced and offers better security than the Z-Wave security protocol previously used with the system. You won't notice any real changes with the S2 protocol, but it is still a nice addition.
Before we continue any further, we do want to stress that updating the Z-Wave firmware for an IQ Panel 2 System is completely, 100%, optional. This isn't nearly as important as updating the system firmware to the latest version. We mention this fact because updating the system's Z-Wave firmware often requires clearing all of the Z-Wave devices from the network and then re-adding them once the update is complete. This can be extremely inconvenient if you have a large Z-Wave network. And since all you're really doing here is gaining access to the Smart Start feature and making a slight improvement to the security for your automation network, we totally understand if you just decide to skip this process. Also note that you can attempt the updating process without clearing your Z-Wave network first. It's just that this may result in errors that can only be solved by ultimately clearing the network and then re-adding the devices. We believe that it's best to just get it out of the way beforehand. But again, that's totally up to you.
If we haven't scared you away yet, let's take a look at the feature! Once your IQ Panel 2 is running a high enough Z-Wave firmware version, you will find the SMARTSTART icon within the Z-Wave Devices Menu of Installer Programming. This menu is accessed by clicking the small grey bar at the top of the main screen and choosing Settings > Advanced Settings > enter Installer Code (default 1111) > Installation > Devices > Z-Wave Devices > SMARTSTART.
Once you press the Include button in the Smart Start Menu, you will pull up the front camera for the IQ Panel 2. There will be a red square for you to position the QR code for the device. The QR code can be found either on the device itself or on its packaging. Simply position the QR code inside the red box, and the system will begin scanning.
Once the scan is successful, you will then be able to add the new automation device like normal. And just like that, you have saved yourself the trouble of performing the traditional exclusion/inclusion process for adding a new Z-Wave device. Petty cool!
At this time, the list of devices that can be added in this way is still very small. Here is the current list of devices that we know work with the feature:
- Alarm.com ADC-T3000 Smart Thermostat (ADC-T3000)
- Alarm.com ADC-SWV100 Smart Water Valve (ADC-SWV100)
- Danalock DLOV3BTZU V3 Z-Wave Smart Lock (DLOV3BTZU)
- Qolsys IQ Dimmer (QZ2140-840)
- Qolsys IQ Outlet (QZ2130-840)
- Eaton Wireless Switch (RF9601D)
- Eaton Wireless Accessory Switch (RF9617D)
- Eaton Universal Smart Dimmer (RF9640-ND)
- Eaton Smart Accessory Dimmer (RF9642-ZD)
- Eaton Duplex Receptacle (RFTR9605-T)
For even more information regarding the Qolsys IQ Panel 2 Plus Smart Start feature, we strongly recommend checking out this comprehensive FAQ we wrote on the feature. It will tell you pretty much everything you would want to know about using Smart Start on the IQ Panel 2.
If you have any additional questions about the Smart Start feature or the Qolsys IQ Panel 2 Plus, including the system's Z-Wave firmware version, please email us at support@alarmgrid.com. This email is also great if you want to contact us about starting monitoring service. Our team checks email from 9am to 8pm ET M-F. We look forward to hearing from you!
vivent security reviews details
Discover extra facts about Vivint pricing on this page https://www.usnews.com/home-security/vivint
from
https://www.alarmgrid.com/blog/exploring-the-smart-start-feature-for-the-qolsys-iq-panel-2-plus
No comments:
Post a Comment