Integrate Your Wired Smoke Detector Network Using Listening Modules - Alarm Grid

Integrate Your Wired Smoke Detector Network Using Listening Modules

Posted April 10, 2020 at 09:00 am By Michael Goris

When working with security systems, there are only certain types of smoke detectors that can directly integrate with an alarm panel. But many people overlook the fact that almost all high-voltage smoke detectors can still be integrated indirectly using smoke detector listening modules.

Smoke detector listening modules are designed to actively listen for the Temporal 3 sound of an activated smoke detector. By law, life-safety smoke detectors must produce the Temporal 3 sound, which consists of three (3) consecutive tones, followed by a short pause, and then repeating continuously. Both high-voltage 110V smoke detectors and wireless battery powered smoke detectors will produce the sound. This means that you can use listening modules with both types.

All new construction is required to be outfitted with high-voltage smoke detectors. As a result, it's very likely that you already have these devices in your home or business. You should test these devices to make sure that they are working, and replace any devices that are non-functional. Then you can use a listening module to integrate the devices with your security system and your alarm monitoring service. If you have a network of interconnected hardwired smoke detectors, then you can use a single listening module to takeover the entire network!

Like all security and life-safety products, you smoke detector listening module will need to be tested regularly. Before doing any testing, you put your system on test mode by either contacting your central station directly or by using the MyAlarms.com feature if you are an Alarm Grid monitored customer. Then activate the smoke detector's sounder by using an test button (if applicable) or by directing canned smoke into its vents. Make sure that your listening module detects the sound and triggers an alarm on your system. Remember that the listening module should be mounted within six (6) inches of the detector for best results.

We offer two (2) smoke detector listening modules on our website. The Interlogix SLX-AD-T3 is for 319.5 MHz systems, while the Encore FireFighter FF345 is for 345 MHz systems. Check and make sure you purchase the correct model that will successfully enroll with your alarm panel. If you aren't sure which one to get, then you should contact us at support@alarmgrid.com, and we will be happy to help. Our support hours run from 9am to 8pm ET M-F. We look forward to hearing from you!

Vivint home security reviews details

This webpage has  info about Vivint smart home.

from
https://www.alarmgrid.com/blog/integrate-your-wired-smoke-detector-network-using-listening-modu